Door and Gate Controls 

A range of standard door and gate controls with radio control, safety beams, loop detectors are available from stock. We also offer a range of custom made controls which include inverter variable speed, warning lights ,traffic lights, counters and status indication.   

First   Previous   1 2   Next   Last

CT100 SERIES - Vehicle Counter

The CT100 is a vehicle counter with 4 x UP Count inputs and 4 x DOWN Count inputs. The counter has been designed to count the vehicles in a parking facility. The counter is initially preset to the...
Fork Lift Truck Radio Transmitter

The 4 and 10 channel transmitters are designed for harsh environments they are supplied fitted in a metal waterproof enclosure. Fork Lift TX Brochure Enquire about this Product
i 5 PE Beam

The i5 Infra Red Beam consists of a transmitter and receiver unit mounted on opposite sides of the entrance. The transmitter sends a modulated infra red beam to the receiver. When the beam is...
LD 100 Series - Single Channel Loop Detector

The LD100 is a series of single channel inductive loop detectors. The use of microprocessor based technology enables a large number of functions to be incorporated into a small package. The LD100 is...
LD200 Series - Duel Channel Loop Detector

The LD200/LD202 is a dual channel inductive loop detector. The LD200 is easy to set-up and install and can be used for direction sensing. Typical applications include safety loops, arming loops and...
LK + GF - Logic Controllers

The LK & GF logic controllers are suitable for use with 3 phase and single phase operators. Speed control with adjustable ramp speeds is available on some modelsAll panels have facilities for...
Mini Basic - Door Control Panel

The Mini Basic provides a low cost solution for applications were auto close and safety PE beams are required. Features: Facility for radio receiver. Fully adjustable auto close from 2 seconds to 4...
PBS - PE Beam with Solar Panel

The PBS safety PE beam has a battery powered transmitter which is charged by a solar cell. Power cables are only connected to the receiver, with no cables needed across the opening.The transmitter...
PC 50 - Reflective PE Beam

The PC50 reflective beam is a high quality compact unit made from ABS plastic and is waterproof to IP67.Alignment of the beam is achieved through adjustment of the potentiometer mounted on top of the ...
PL 400 - Controller with Loop Detector

The PL400 PLC has been developed as a versatile controller for use in parking or access control applications. The PLC can be used to operate gates or boom gates where an inductive loop detector is...

First   Previous   1 2   Next   Last

 

Email: info@rotech.com.au
Phone: +61 (0) 7 3205 1123
Address: 10 / 5 Deakin Street Brendale QLD 4500 Australia